Removable Insulated Square and Rectangular Access Doors with Tab type Fixing October 2000 Access/Shield Series T Actionair Access/Shield Series T Product Data Sheet AS/T / 10-00 Introduction Access/Shield Series T square and rectangular type access doors with Tab type fixing, are available in seventeen sizes for fitting on to ductwork, and provide a fast and efficient means of duct access. Specification Door The door manufactured in galvanised sheet steel and of double skinned construction. 25mm thick. Insulation The insulation which is contained between the door panels, has excellent thermal and acoustic properties, with a thermal density of 45 kg/m3 . Seal The frame incorporates a compression sealing gasket. Frame The frames comprise of a folded galvanised steel Z section with castellated edge tabs for folding over into the duct opening, thus there being no need for rivets in fitting the assembly. Latches The half turn cam fasteners are positioned at strategic locations for optimum closure, low leakage and quick release for access. Options Please contact Customer Service for information on the following options; external flanges to retain duct insulation edges, hinged doors and wire safety tie. Product Range The standard product range includes seventeen sizes, from 100mm x 100mm to 600mm x 600mm. Rectangular doors are also included in the standard range. Application The Access/Shield Series T square and rectangular access doors with Tab type fixing are designed for inclusion in ductwork, for access to dampers, duct cleaning inspection and maintenance purposes. Features and Design Guide Choice of seventeen sizes. Fast and simple installation. Tab type fixing. Double skin insulated construction. Manufactured from galvanised sheet steel. Positive cam and lock fastening. Approvals Complies with the latest DW144 leakage specification. PRODUCED BY GRAPHIC PARTNERSHIP www.graphicpartnership.co.uk Access/Shield Series T For further information, please refer to the Actionair Access/Shield product catalogue or contact our Customer Service Office. The information contained herein is subject to change without notice due to continuing research and development. South Street, Whitstable, Kent CT5 3DU England Tel: (01227) 276100 Fax: (01227) 264262 International Code: +441227 Email: firstname.lastname@example.org Website: www.actionair.co.uk Cut a hole in the ductwork 30mm under door size,. (e.g. AS/T 1515 door size = 150mm x 150mm, therefore cutting hole size = 120mm x 120mm). Fit the frame into the hole in the duct and whilst compressing the frame gasket, knock over the edge tabs using a dolly and hammer as shown right. Installation Method Ordering Procedure Standard Product Range Please specify Quantity Series Series Type Door Thickness Door Size Example 5 Access/Shield T AS/T 4040 25mm 400mm x 400mm Size/Type Door Size Cutting Hole Size Approximate Weight (mm) (mm) (kg) AS/T 1010 100 x 100 70 x 70 0.50 AS/T 1015 100 x 150 70 x 120 0.60 AS/T 1020 100 x 200 70 x 170 0.70 AS/T 1515 150 x 150 120 x 120 0.75 AS/T 1520 150 x 200 120 x 170 0.80 AS/T 1530 150 x 300 120 x 270 1.00 AS/T 2020 200 x 200 170 x 170 1.00 AS/T 2030 200 x 300 170 x 270 1.75 AS/T 2040 200 x 400 170 x 370 2.00 AS/T 2525 250 x 250 220 x 220 1.75 AS/T 3030 300 x 300 270 x 270 2.00 AS/T 3045 300 x 450 270 x 420 2.75 AS/T 3060 300 x 600 270 x 570 3.00 AS/T 4040 400 x 400 370 x 370 3.50 AS/T 4060 400 x 600 370 x 570 4.00 AS/T 4545 450 x 450 420 x 420 3.75 AS/T 6060 600 x 600 570 x 570 6.00 Please note rectangular sizes shown can be mounted in either plane i.e. width x higher or by height x width. Please contact our Customer Service office for availability of sizes not shown. Please note: the data contained herein is for general information only.