SmokeShaft ventilation system - SSV

SSV image 1 high res white bg.jpg
SSV 1 x 2 image 2 high res white bg.jpg
SSV image 2 high res white bg.jpg
SSV image 3 high res white bg.jpg
SSV image 4 high res white bg.jpg
SSV image 1 high res white bg.jpg
SSV 1 x 2 image 2 high res white bg.jpg
SSV image 2 high res white bg.jpg
SSV image 3 high res white bg.jpg
SSV image 4 high res white bg.jpg

SmokeShaft ventilation system - SSV

Key Features

Features

  • Smoke Management and Fire Dampers operational up to 2 hours. 
  • Halogen free low smoke and fume cabling supplied as a standard feature. 
  • Low closed blade leakage. 
  • Dampers when closed are compliant to BS476 Part 20 Fire Damper Test Standard. 
  • The control mode/damper connection shall be by means of the Unique snaplock reverse mounted drive interface ensures a non-obstructive installation into the builders opening. 
  • Aesthetic finished



Description

The growing demand for multi storey apartment, hotels and flats requires safe evacuation of smoke and toxic gases within the stairwell and corridor area to allow time for the safe evacuation of the occupants.

Smoke Shaft Ventilation PTC? dampers have been designed for installation within the smoke evacuation risers in multi storey buildings.

SSV series dampers will give up to 1.56m2 free area for the evacuation of smoke and toxic gases within the stairwell lobby and corridor areas of the building.

Construction

Models Frames can be supplied either with or without a flange return, depending on the fixing arrangements suitable for the builders opening.

Grille Fixings Grilles are prepared with countersunk screw holes in the flange to suit size 8 screws (by others).

Damper Fixings Dampers should be secured using suitable M6/M8 fire rated anchors at 200mm CTRS to secure the damper sleeve to the wall structure. (Drillings and anchors by others)

Specification

Proportional Torque Control (PTC?). Automatic Smoke Release Dampers with 75mm x 0.5mm thick stainless steel aerodynamic interlocking blades incorporating synthetic seal, with steel blade end bearings and peripheral gasketting. Housed in a galvanised steel fully welded casing with either a flanged or flangeless sleeve for Grille connection. The control mode/damper connection shall be by means of the snaplock? drive interface mechanism, which is reverse mounted so as not to obstruct installation into the builders opening.

Dimensions

“Please note maximum single nominal damper size is 750mm wide X 1000mm high (builders work opening size 833mm wide x 1083mm high), please refer to sales office for more information”.


Product Documents

Title Type Added Link
SmokeShield Control Modes Installation IOM about 3 months ago Download >
M5 – 3P CMS (230V) Installation and Operating instructions IOM about 3 months ago Download >
Mode 5 and 6 PTCTM Regular Spring Return Actuator Datasheet Datasheets about 4 months ago Download >
SSV Catalogue Brochure about 8 months ago Download >

Find out more about our SmokeShaft ventilation system - SSV

Name *
Name