Actionpac EMB - Bespoke damper control panel and monitoring system

Actionpac-EMB-FC.jpg
Actionpac-EMB-FC.jpg

Actionpac EMB - Bespoke damper control panel and monitoring system

Key Features

The Actionpac EMB Control System, consists of a number of smoke/fire dampers hard wired individually or in groups to a central control panel. The panel utilises relay logic and LED indication of damper status.

  • Purposely manufactured for any particular project to suit specific requirements.
  • Individually or collectively control/monitoring of dampers.
  • Wall mounted enclosures.

Specialist panels available - Fan control panel, Fireman's control panel, Mimic panel, Fire damper monitor panel.



Bespoke Damper control panel purposely manufactured for any project to suit specific requirements.

Description

The Actionpac EMB Control System, consists of a number of smoke/fire dampers hard wired individually or in groups to a central control panel. The dampers may be individually or collectively controlled and continuously monitored.

Dampers and control modes may have differing control and monitoring requirements and therefore will be connected to the site wiring, which when installed by the contractor, shall provide the relevant specified functions.

Options

  • Lockable glazed door.
  • Special paint finish to BS standard colour reference numbers.
  • Flush mounting flanges.
  • Latching push buttons.
  • Fireman?s override key switches.
  • Test switch.
  • Lamp test.
  • Audible alarm with mute facility.
  • B.M.S common fault relay interface.
  • B.M.S output.
  • Delay timers.
  • Battery backup.

Actionpac Lite 80 (up to 80) or LNS4 (up to 512) recommended when there are more than 45 smoke/fire dampers to be controlled and monitored.

Accessories

DCB - damper connection box for control modes. This can be factory prewired to Control Mode (all voltages).

Construction

EMB Bespoke Damper control panels are purposely manufactured for any particular project to suit specific customer requirements.

  • Wall mounted enclosures to IP55.
  • Finished in RAL 7035
  • Custom engraved traffolyte fascia.
  • LED indication of damper status.
  • Zonal inputs.
  • Door interlocking isolator.
  • Miniature circuit breaker protection.

Specification

The Actionair Actionpac EMB Control Panel typically consists of the appropriate number of switches to provide individual or group control, LED indication for status monitoring and all necessary relays and timers to comply with the customers needs for fully or semi- automatic damper operation.

Interface with the Fire Alarm panel is via volt-free contacts which are normally closed and open upon alarm, the Actionair Actionpac EMB damper control panel will then activate relevant dampers to their alarm status.

Actionair Damper Control Panels are purposely manufactured for any particular project to suit specific customer requirements.

Dimensions

Estimated enclosure sizes (mm) 1-4 Dampers - (WxHxD) 400x400x210 5-8 Dampers - (WxHxD) 400x400x210 9-12 Dampers - (WxHxD) 500x500x210 13-16 Dampers - (WxHxD) 500x500x210 19-20 Dampers - (WxHxD) 600x600x210 21-30 Dampers - (WxHxD) 600x600x210 31-40 Dampers - (WxHxD) 600x600x210 41-50 Dampers - (WxHxD) 800x800x210


Product Documents

Title Type Added Link
Actionpac EMB Catalogue Brochure about 9 months ago Download >

Find out more about our Actionpac EMB - Bespoke damper control panel and monitoring system

Name *
Name