Continuous status monitoring
and display.
ACS-D 1 hour fire rating
door mounted.
Slimline non-vision intumescent
fire and smoke damper with
unique sliding plate smoke
control.
Fully automatic open/close
operation with Talkpac 2-way
communication smoke control
system.
ACS-W 2 hour fire rating
wall mounted.
|
|
| |
Actionair Trans/Shield
ACS
Fully Automated Intumescent Fire and Sliding Plate Smoke
Damper
|
The
Range
The Trans/Shield ACS fully automated intumescent fire and sliding
plate smoke dampers are designed for air transfer applications
through fire rated doors and walls.
Application
The range of combined intumescent
fire and smoke dampers can be used
in all applications where cold smoke
containment is required. These
dampers are connected, via a control
panel, to a standard fire alarm
system. In event of an alarm
condition, or power failure, the
dampers shut, preventing the
passage of cold smoke. These
products have been designed to
allow the smoke damper element
to be used without the intumescent,
in applications where only smoke
and/or gas containment is required. Air transfer products have many
applications in new building and
refurbishment projects. Ventilation
through doors and walls is often a
very cost effective means of
improving air quality by better air
distribution. However, the use of
straight forward air transfer grilles
often conflicts with the needs of fire
safety, particularly where ventilation is
required between fire compartments
or into corridors and other ‘means of
escape’ routes.
|
| |
Features
|
|
Catalogue |
Fail-Safe
Designed to close automatically in the
event of a fire alarm being activated, a
power failure or wiring damage.
Auto Reset
Will reset automatically to the openposition when the fire alarm is cancelledor power restored.
Autocycling
Once in every twenty four hours each
damper is closed and re-opened to
prevent a build up of dust or debris
between moving parts.
Compatibility
The Talkpac system is designed to
interface with any fire alarm panel and
subsequent to initial installation, additional
dampers can be incorporated where there
are free channels in the system.
For
more information including dimensional data and fitting, please view the Trans/Shield
ACS Catalogue Here. |
|
|
|
|
 | |
|
|
